MRG FOLD (2nd gen) Assembly Guide
Bill of Materials
This is the required bill of materials if you bought the PCBs+Panel only for the 2nd gen board. All components listed below are already included in the full DIY kit.
| Component | Quantity | Notes |
|---|---|---|
| ICs: | ||
| TL074BCN | 1 | PDIP |
| TL072BCP | 1 | PDIP |
| TLV274IN | 1 | PDIP |
| Other Capacitors: | ||
| 22uF Electrolitic Capacitor | 2 | Rubycon 25ZLG22MEFC5X7 |
| Other Components: | ||
| L78L05 | 1 | 5V Voltage Regulator |
| L79L05 | 1 | -5V Voltage Regulator |
| 14 Pin 2 Row Header | 2 | 2x7 2.54mm pitch |
| 14 Pin 2 Row Socket | 2 | 2x7 2.54mm pitch |
| 10 Pin 2 Row Header | 1 | 2x5 2.54mm pitch |
| B100K | 4 | Alpha 9mm T18 Potentiometer |
| PJ398SM 3.5mm Jacks | 4 | “Thonkiconn” |