MRG KICK (2nd gen) Assembly Guide
Bill of Materials
This is the required bill of materials if you bought the PCBs+Panel only. All components listed below are already included in the full DIY kit.
| Component | Quantity | |
|---|---|---|
| ICs: | ||
| LM6134BIN/NOPB | 1 | PDIP |
| Capacitors: | ||
| 22uF Electrolytic Capacitor | 2 | Nichicon UPW1E220MDD6 |
| 33uF Electrolytic Capacitor | 1 | Nichicon USW1E330MDD |
| 15nF Film Capacitor | 3 | 5mm pitch, polyester |
| 100nF Film Capacitor | 1 | 5mm pitch, polyester |
| Other Components: | ||
| LED 3mm | 1 | Lite-on LTL1CHKFKNN |
| 14 Pin 2 Row Header | 2 | |
| 14 Pin 2 Row Socket | 2 | |
| 10 Pin 2 Row Header | 1 | |
| B100K | 3 | Alpha 9mm T18 Potentiometer |
| B1M | 1 | Alpha 9mm T18 Potentiometer |
| PJ398SM 3.5mm Jacks | 3 |