MRG KICK Assembly Guide
Bill of Materials
This is the required bill of materials if you bought the PCBs+Panel only. All components listed below are already included in the full DIY kit.
Resistors usually included in the kit are usually Multicomp MF12 Series.
Note: Use of 1% tolerance 3.5mm resistors highly recommended.
| Component | Quantity | |
|---|---|---|
| ICs: | ||
| LM6134BIN/NOPB | 1 | PDIP |
| Resistors: | ||
| 220R | 2 | |
| 470R | 1 | |
| 1K | 1 | |
| 4K7 | 4 | |
| 6K8 | 1 | |
| 10K | 4 | |
| 18K | 1 | |
| 51K | 3 | |
| 100K | 5 | |
| 360K | 1 | |
| 470K | 1 | |
| 1M | 2 | |
| Ceramic Capacitors: | ||
| 100nF (104) | 3 | |
| 10pF (100) | 1 | |
| 10nF (103) | 3 | |
| 33nF (333) | 1 | |
| Other Capacitors: | ||
| 22uF Electrolytic Capacitor | 2 | Nichicon UPW1E220MDD6 |
| 33uF Electrolytic Capacitor | 1 | Nichicon USW1E330MDD |
| 15nF Film Capacitor | 3 | 5mm pitch, polyester |
| 100nF Film Capacitor | 1 | 5mm pitch, polyester |
| Other Components: | ||
| 1N4148 Diode | 6 | DO-35 |
| LED 3mm | 1 | Lite-on LTL1CHKFKNN |
| 14 Pin 2 Row Header | 2 | |
| 14 Pin 2 Row Socket | 2 | |
| 10 Pin 2 Row Header | 1 | |
| B100K | 3 | Alpha 9mm T18 Potentiometer |
| B1M | 1 | Alpha 9mm T18 Potentiometer |
| PJ398SM 3.5mm Jacks | 3 |